RESEARCH ACTIVITY

Circumventing Huge Volume Strain in Alloy Anodes of Lithium Batteries

Summary

  • Discovered that the use of high purity aluminum foil can successfully control the huge volume expansion/contraction of high capacity aluminum anodes during charge/discharge processes, and clarified its mechanism.
  • Determined that high purity aluminum foil can be an “integrated anode”, which can replace two components of the conventional graphite anode, i.e., a layered structure of carbon material (that accommodates lithium ions) and copper foil (that functions as a substrate to collect current) as it plays the roles of both components.
  • Contributed to higher performance and significant simplification of the battery manufacturing process.

Abstract

Research Assistant Professor Hongyi Li and Professor Tetsu Ichitsubo et al. at Institute for Materials Research, Tohoku University and researchers at Sumitomo Chemical have jointly undertaken the research and development of novel anodes for higher capacity of lithium-ion rechargeable batteries since April 2019. This joint research group has successfully elucidated a new mechanism for circumventing the huge volume strain during charge/discharge battery reactions with the use of a high purity aluminum foil alone as anode.

Lithium-ion rechargeable batteries consist of four components: a cathode, an anode, an electrolyte, and a separator film. Lithium ions move between the cathode and anode when the battery is charged or discharged; when charging, the anode takes in the lithium ions released by the cathode, and the reverse when discharging. Carbon-based materials are currently the mainstream for anodes. However, the use of silicon or metals such as tin and aluminum, has been considered as promising anode materials for high energy-density batteries because these materials can store three to ten times more lithium ions than the same weight carbon-based materials. Despite the higher capacity for absorbing more lithium ions, the application of metal anodes has been deadlocked because their huge volume changes (two to four times) can destroy the anode’s structure.

The joint research group has discovered that optimizing the hardness of high purity aluminum foils can control volume changes, thereby finding a solution to this long-standing issue. This discovery was made possible by integrating the excellent materials science capabilities of the Institute for Materials Research, Tohoku University and the excellent technologies that Sumitomo Chemical has cultivated to date through its high purity aluminum business. As the integrated aluminum anode can dramatically streamline the manufacturing process of lithium-ion batteries, the two organizations expect that this will reduce impacts on the environment while allowing for the creation of higher capacity, lighter weight, and lower priced lithium-ion rechargeable batteries. These research results can also be applied to next generation solid-state batteries, dual-ion batteries, etc.

Institute for Materials Research, Tohoku University and Sumitomo Chemical will continue their joint research efforts toward practical implementation of the integrated aluminum anode and contribute to the development of a sustainable society.

The research was published in Nature Communications (online version, April 13, 2020)

Publication Details

Authors

H. Li, T. Yamaguchi, S. Matsumoto, H. Hoshikawa, T. Kumagai, N. L. Okamoto, T. Ichitsubo

Journal

Nature Communications

DOI

10.1038/s41467-020-15452-0

Online publication date

April 13, 2020

Press release online

PDF: 306KB